|Award||Product Image||Product Title||Price||Buy|
|#1 Best Overall||Hobart 500559 Handler 140 MIG Welder 115V||$599.99|
|#2 Alternative||Goplus MIG 130 Welder Flux Core Wire Automatic Feed Welding Machine w/Free Mask||$149.99|
|#3 Alternative||Forney Easy Weld 261, 140 FC-i Welder, 120V, Green||$252.19|
|#5 Alternative||Lincoln Electric Powermig 210 Mp #K3963-1||$1,899.00|
When the topic of welding is brought up, many people are unaware that there are different categories that a welding technique can fall under. One of these main categories is MIG Welding or Gas Metal Arc Welding.
As you can probably tell from the name, MIG welding includes the use of gas to heat up two metal pieces and join them at a center point.
With there being so many different types of welding techniques, there is also a numerous amount of supplies and equipment that are needed to complete each task, specific to the particular technique.
So, with that being said, there is a huge supply list of equipment that is necessary for MIG welding specifically.
This gear most likely will not be used for any other welding technique, because it is tailored to the activities that are associated with MIG welding only.
If you are looking into getting started with MIG welding, it is important to note that you will be needing equipment that is specially made for this craft.
Once your decision is final as far as which welding field you would like to enter first, you will be prepared to start chopping down at your MIG welding supplies checklist.
Today, we will be going over the best gear that you can find for MIG welding, with all of the details on product specifications, extra features, and even customer reviews.
If quality MIG welding gear is what you are looking for, you will certainly find it here.
The Hobart 500559 Handler 140 MIG Welder 115V is an MIG welder that supports the processing of various metals, including, but not limited to, iron, copper, brass, and magnesium.
If you are looking for a smooth welding machine that will help you get even and precise results, the Hobart 500559 Handler 140 MIG Welder 115V might be for you.
In addition to the wide variety of materials that this particular machine supports, you can play with various thicknesses as well.
The Goplus MIG 130 Welder AC Flux Core Wire Automatic Feed Welder Welding Machine w/Free Mask Commercial (Black) is a compact MIG gas welder.
The material of the body is a heavy-duty stainless steel, which is expected to last for many years after the initial purchase.
The Goplus MIG 130 Welder AC Flux Core Wire Automatic Feed Welder Welding Machine w/Free Mask Commercial (Black) is a great choice for someone who is looking for a simple, compact welding machine for MIG.
The Forney Easy Weld 261, 140 FC-i MIG Welder is a lightweight and easy to use portable MIG welder.
It supports the welding of several different materials, and includes additional supplies like a clamp, MIG gun, and an integrated handle with torch wrap.
If the other products have not sparked your interest, the Forney Easy Weld 261, 140 FC-i MIG Welder is an excellent alternative.
This machine has infinite voltage and speed control, and comes with a lot of extra features and supplies that you would normally have to purchase separately.
The only drawback to consider when leaning toward this product is that the wire feeding speed is a little bit slower in comparison to other welding machines.
The Forney Easy Weld 299 125FC Flux Core Welder, 120-Volt, 125-Amp is the best welder that you can get for the money, if you are worried about preserving your funds.
With power capacities of 120-Volt and 125-Amp, you can’t go wrong with this easy weld machine.
If you are looking for a welder that gets the job done, the Forney Easy Weld 299 125FC Flux Core Welder, 120-Volt, 125-Amp might be your best choice.
While some customers have complained about problems with the wire feed motor, it has been reported that this machine is good for what you pay.
Basically, if you are looking for the bare welding necessities, you are safe going with the Forney Easy Weld 299 125FC Flux Core Welder, 120-Volt, 125-Amp.
The Lincoln Electric Powermig 210 Mp #K3963-1 is an lightweight and portable dual voltage welder.
The versatility of this machine when it comes to size and features is virtually unbeatable.
It also includes color display that will guide you through the process of any welding project that you have on your hands.
The Lincoln Electric Powermig 210 Mp #K3963-1 is a great choice for someone who does not have a lot of room for their welding equipment.
This machine is both lightweight and portable, meaning that you can easily move it around if need be.
With a color display for simple guides along the way and dual voltage options, the possibilities of what you can do with this machine are virtually endless.
When you are learning the technique and skill of MIG welding, in particular, you will be utilizing a specific machine that is designed for this purpose alone.
This machine is called an MIG welder, and it is pretty much exactly what you think it is.
For the MIG welding technique, these machines are increasingly convenient to use for each job that you need to get done as a welder.
Whether you are a hobbyist or an aspiring professional, it is important that you understand exactly how to use an MIG welder before you get going.
When it comes to using an MIG welder, there are four main steps that are included in the process:
The first thing that you will need to do before you can use an MIG welder is to learn and understand the process of MIG welding.
If you have never practiced the technique before and you have no idea how to execute it, you will not have good results when you attempt to use the machine.
If you have practiced another welding technique like TIG, you won’t be able to use it on this machine. Instead, you will need to know MIG welding.
So, if you are planning on utilizing one of these machines, you should educate yourself on the process beforehand.
After that is established, you will need to prepare your work surface and materials for welding.
This will include clearing a space on the proper welding surface, making sure there is no dust or debris left behind on the table, or anything that you can fall or trip on, and wiping down the top of the table in preparation for your machine.
Lay out your MIG welder, as well as the materials that you will be welding and any other equipment and tools that you might need, including your safety gear.
When it is time to start welding with your machine, you will need to install the wire into it.
MIG welders operate with the use of a wire being fed through the machine, which will ultimately create the arc that is used for the actual process of welding.
Once you have successfully positioned the wire into the machine, you will be ready to go through with the welding process in order to achieve your final desired result.
Now, let’s take a look at how you can actually use the MIG welder once you are finished setting everything up.
The first thing that you will need to do when using your MIG welder is to adjust the polarity settings. In this case, you should set it to DCEP, or reverse polarity.
Next, you must adjust the electrodes in your contact tube. Once this is done, you will need to keep in mind that this should remain the same length throughout the entire process, under your control.
After that, you will find and use the right shielding gas, and then proceed to demonstrate MIG welding techniques to get the job done.
Now that you have gotten an explanation of how to prepare your welding machine and surface, as well as how to use the actual machine, we will discuss the techniques that you can practice with an MIG Welder.
The first, and most common, technique that is used for MIG welding is the drag and push technique. This consists of moving the metal through the machine to weld a joint.
While using an MIG welder, you can also create a flash weld at a 90 degree angle, move the piece horizontally and vertically, and create an overhead weld.
Regardless of the technique that you choose to practice with your MIG welder, you will need to use your grinder to get all of the additional filler off of the finished product before it is finally presented.
With a basic understanding of how to use an MIG welder also comes a better understanding of how the machine itself actually works.
Now, we will go over the internal process that an MIG welder will go through in order to produce the finished product.
After the wire is fed through the machine initially, an arc is created by the same wire. Through the MIG welder, gas is used to heat up the metal and meld the two pieces together.
The heat settings of the MIG welder determine how deep the machine will penetrate the metal at any given time. Unlike many other welding types and techniques, MIG welding machines actually penetrate the metal during the process, which makes for a much stronger connection than you will get with another machine.
At any time when you are using an MIG welder machine, it is important to keep cleanliness and maintenance in mind.
MIG welders can get very expensive when you need to repair or replace parts, and even more so when you need to buy a new one because you have not taken proper care of your investment.
One of the most vital components of your MIG welder that you will need to keep clean is your liner.
If this area experiences too much dust and debris built up inside, you can experience a lot of delays in the performance of your machine.
When you need to clean your MIG welder liner, there are plenty of ways that you can go with it, from lube to soap and water.
However, we have found that there is one fool-proof way to clean the liner of your MIG welder that won’t cause any damages or additional headaches.
Let’s take a look into this simple three-step process that will leave you with sparkling clean welder liners in a matter of just a few minutes.
The first thing that you will need to do before you can clean your MIG welder liner is to remove the guns from the feeders of the machine.
This will clear the path in toward the liner on the inside of the machine.
The only piece of equipment that you will need for cleaning is an oxygen bottle. Most of these bottles come with a straw-like element that comes out of the front.
You can stick this into the opening where you took the guns out and push on the top to release the air.
Repeat this step for several tries until you notice that all dust and debris has been emptied out of the opening.
Depending on how long it has been since you cleaned your machine and how much dust has settled inside, you might have to continue this several times.
When you have blown out all of the additional scraps and you feel that your liner has been satisfactorily cleaned, you will simply plan the guns right back into the feeders and leave your machine there until it is time for your next project.
Since MIG welding utilizes a penetrating technique to join two metals together, it is considered to be increasingly strong.
Other types of welding techniques will typically just melt and mend two pieces of metal together, rather than piercing the surface with a combination of gas and heat.
This type of strength is considered to be 70,000 psi tensile strength.
This is much stronger than most types of steel, and is something that the MIG welding technique has over many of the others. While not going trough like a plasma cutter.
As it compares to all of the other types of welding that make up their own categories, MIG welding techniques have definitely proven to be some of the strongest.
As you can see, there are a number of factors to consider when you are trying to purchase an MIG welder machine.
With so many different features and specifications to choose from within each individual machine, the options can seem endless.
While this might be overwhelming for a first time welder, it is important to stay calm and consider all of your options.
The best thing that you can do in this situation is to decide on which features are most important to you.
Once you have a solid foundation and understanding of exactly what you are looking for in the perfect MIG welder machine, you will be able to go forth with your decision-making process.
After you have finally made your decision on the most ideal purchase for your individual welding needs, you will find that you are only half of the way there.
If you are serious about getting into MIG welding and perfecting your craft, you must be willing to invest in a long list of equipment that will aid you in doing so.
Unlike any other category of welding, you will need an MIG welder machine, as well as specialized gear that will allow you to produce the strong welds that this technique provides.
To conclude, there is a lot of equipment that is required for MIG welding.
Although it might seem intimidating to be faced with such an extensive shopping list, you will thank yourself when you consider any one of the items that were discussed in this review.
With the consideration of a number of factors from specifications to size and supported materials, you are definitely closer than ever to locating and pressing purchase on your dream MIG welder.